Safety and a more upmarket look: that is why Kyle upgraded the halogen headlights on his 2012 Megane to LED. The light output of the standard halogen bulbs is so disappointing that it costs you visibility, and therefore safety. The fitted XTR LED changes that, and we have summarised the review from a very satisfied Kyle below.

LED Headlight Upgrade for the Renault Megane: Hilox XTR Black LED Kit
Short answer
Why did Kyle choose LED headlights for his Renault Megane?
- The 2012 Megane threw up no dashboard warning with a bulb removed, so the CAN-bus module was not needed.
- The H7 XTR Black delivers 3,600 lumens per LED, 3.5 times more light than halogen.
- Putting the headlight unit back in was harder than the installation itself.
- You can convert the parking light, fog light, interior and number plate lights to LED too.
Why did you choose an LED kit?
I chose LED lighting for safety reasons as well as cosmetic ones. The standard halogen headlights on the Renault Megane were disappointing in terms of light output. On top of that, the colour of the light really didn't match the daytime running lights under the headlight.
How did the installation go?
The installation was very easy. Before we started, we first checked whether the car threw up a dashboard warning when we removed a bulb. Luckily it didn't, so we didn't need to connect the CAN-bus module. Beyond that it was plug and play. Putting the headlight unit back in was harder than the installation itself, but that is down to the car.
Renault Megane LED: what was installed?
These products also suit the Megane
What you need to know about the H7 XTR Black LED kit
The H7 XTR Black LED kit is Hilox's 4th generation XTR LED. You get 3,600 lumens per LED, which according to the product information is 3.5 times more light than a halogen bulb. The colour temperature is 5700K: white light instead of the yellowish glow of halogen. Exactly the difference Kyle was bothered by, because his halogen low beam didn't match the daytime running lights.
The bulbs contain Luxeon Z ES LED chips by Lumileds (Philips). They last up to 50,000 hours: 50 times longer than halogen and 12 times longer than xenon. A Smart Cool IC chip and a Maglev fan keep the chip temperature under control, and the LED is IP68 waterproof, so a rain shower or a splash of water is no problem.
What is in the box?
- 2 x H7 XTR Black LED bulb, 36.2 mm
- 2 x XTR Black driver, 66 x 31.1 x 15.7 mm
- 2 x XTR CAN-bus II module 12 V, 70 x 38 x 23.5 mm
You can find all fittings and versions, including the Solo variant with a single bulb for motorbikes, at the XTR Black LED kits 3600LM.
How to fit an H7 LED kit in your car
The XTR LED is plug and play: you don't have to modify the wiring or the headlight itself. The steps are the same for most cars.
- Switch off the car and the lights and let the halogen bulbs cool down first.
- Remove the dust cover at the back of the headlight. On some cars you have to take the headlight unit out for this; on the Megane, putting that unit back in was the trickiest part.
- Unplug the connector and take the halogen bulb out of the bulb holder.
- Fit the H7 LED in the bulb holder and connect the driver to the original connector.
- If your car shows a warning, connect the supplied CAN-bus II module as well, following the manual.
- Tuck the driver and any module away neatly and put the dust cover back.
- Switch on the low beam and check the dashboard for warnings.
You can rotate the XTR LED through 360 degrees. That lets you adjust the beam pattern for the best result in both reflector and projector headlights.
Do you need the CAN-bus module?
Many modern cars check whether the bulbs still work. An LED draws less current than a halogen bulb, so the on-board computer can think a bulb has failed. Then you get a warning on your dashboard. The CAN-bus II module in the XTR kit is designed to deal with exactly that.
Whether your car needs the module is something you test the same way Kyle did: remove one halogen bulb and see whether the dashboard complains. No warning? Then you can try the LED without the module. A warning? Then connect the module. Looking for CAN-bus proof LEDs for other bulb units? Have a look at the CAN-bus LEDs.
Mind the beam pattern and the inspection
An LED has to give light in the same spot as the filament of the halogen bulb. If it sits wrong, the beam pattern is off and you dazzle oncoming drivers. After fitting, have the beam aligned and check that your car still meets the APK requirements (the Dutch roadworthiness test); if in doubt, ask the RDW (the Dutch vehicle authority) or your inspector.
According to the product information, LED bulbs with an H fitting designation cannot receive ECE or E-mark approval and are intended for racing circuits and private land. That goes for all brands. Bear that in mind when you choose.
Frequently asked questions about LED headlights in the Renault Megane
Why did Kyle choose LED in his Megane?
Did the Megane need a CAN-bus module?
How long does the H7 XTR Black LED last?
What is in the H7 XTR Black LED kit?
Which other LEDs suit the Megane?
Three more
from the archive.

Car lighting and car insurance
Blown car bulbs count as normal wear and tear and are not reimbursed, while theft and damage sometimes are. Find out what your car insurance covers and how LED and xenon lighting can help.

Hilox XTR LED kits als beste getest door Truckstar Magazine
In de dimlicht LED test van Truckstar Magazine kwam de Hilox XTR Black als beste uit de bus. Lees hoe de leds scoorden in reflector- en lenskoplampen, op koeling, CAN-bus en APK.

Hilox Father's Day gift ideas
Looking for a cool Father's Day present? Six Hilox gift ideas, from XTR LED kits and MTB lights to LED dog collars, leashes and electric pepper and salt mills.
Once a month,
a real letter.
New products, fitting tips and offers. No noise, never sold on.


