Hilox Lighting
H7 XTR Black LED in a Skoda Octavia: A Customer Review

H7 XTR Black LED in a Skoda Octavia: A Customer Review

Redactie Hilox Lighting
By Redactie Hilox Lighting
Published
Reading time
2 min

Short answer

How does the H7 XTR Black LED kit perform in a Skoda Octavia?

For the LED low beam on his Skoda Octavia, Thomas chose the H7 XTR Black kit from Hilox Evolution: 3600 lumens, or 3.5x more light than halogen. Installation in an Octavia from 2013 onwards was very smooth: 5 to 10 minutes per side.
  • Thomas missed the visibility and looks of the xenon lighting in his previous cars.
  • He chose Hilox for the clear explanations and the guarantee of 100% compatibility with CAN-bus systems.
  • The bulbs were delivered less than 24 hours after ordering.
  • You click the old bulb out and click the new bulb into the bulb holder.

Like Thomas, are you ready for a headlight upgrade that gives you 3.5x more light and a more premium look? Then our XTR LED kit is your answer. Sadly, we still hear all too often that new cars leave the showroom with mediocre or even poor lighting. Annoying, of course, but fixable without too much effort. The XTR kits deliver 3600 lumens, which is 3.5x more than halogen! Driving with these bulbs is easier on your eyes, and your car looks pretty cool too. Read what Thomas makes of it.

Why did you choose an LED kit?

My previous cars came with factory-fitted xenon lighting and I missed the visibility and the looks of it. At first I planned to buy an aftermarket xenon set, but while searching for a decent one I happened to come across articles about Hilox LED lighting. The explanation on their website was so clear and convincing that I did not hesitate to place an order. The advantages of LED were laid out: a fast start-up time, more pleasant light, more compact components and parts that last much longer. On top of that, the guarantee that it is 100% compatible with current CAN-bus systems made me choose Hilox. I ordered the bulbs online in 5 minutes and they were at my door less than 24 hours after ordering, which is a great performance.

How did the installation go?

Installation in a Skoda Octavia from 2013 onwards is very smooth. There is plenty of room to work around the headlight, and plenty of room inside the headlight itself to stow everything. On top of that, you simply click the old bulb out and click the new one into the bulb holder. Installation takes 5 to 10 minutes per side, even if you really take your time.

How the H7 XTR Black LED kit works

The H7 XTR Black LED kit, Hilox Evolution that Thomas fitted in his Octavia is the 4th generation XTR LED. According to the product information you get 3600 real lumens per LED, 3.5 times more light than halogen. The colour temperature is 5700K, a white light that gives the premium look Thomas was after.

The bulbs contain Luxeon Z ES LED chips from Lumileds (Philips), developed specifically for the automotive market and suitable for both reflector and projector headlights. They last up to 50,000 hours, 50 times longer than halogen and 12 times longer than xenon. A Smart Cool IC chip and a Maglev fan keep the chips from burning out, and the LED is IP68 waterproof. You can adjust the LED through 360 degrees to dial in the beam pattern perfectly.

What is in the box?

  • 2 x H7 XTR Black LED bulb, 36.2mm
  • 2 x XTR Black driver, 66 x 31.1 x 15.7mm
  • 2 x XTR CAN-bus II module 12V, 70 x 38 x 23.5mm

You will find other fittings and versions at the XTR Black LED kits 3600LM.

CAN-bus and installation in a modern car

For Thomas, CAN-bus compatibility was the deciding factor. Many modern cars check whether the bulbs are still working. An LED draws less current than a halogen bulb, which can make the on-board computer think a bulb has failed. The CAN-bus II module in the kit is designed to deal with that, so you do not get a warning on your dashboard.

Installation follows the same steps in most cars:

  1. Switch off the car and the lights and let the halogen bulbs cool down.
  2. Remove the dust cover behind the headlight and detach the connector and the halogen bulb.
  3. Click the H7 LED into the bulb holder and connect the driver and, if needed, the CAN-bus II module as described in the manual.
  4. Stow the driver and module in or near the headlight and refit the dust cover.
  5. Test the low beam and check the dashboard for warnings.

After fitting, have the beam aligned and check that your car still meets the APK (the Dutch roadworthiness test) requirements; if in doubt, ask the RDW (the Dutch vehicle authority) or your inspector. According to the product information, LED bulbs with an H fitting designation cannot receive ECE or E-mark approval and are intended for circuit and private-grounds use. You can read more about the difference between LED and xenon in xenon vs LED: the real differences.

Frequently asked questions about LED low beam in the Skoda Octavia

How long does installation take in a Skoda Octavia?
In a Skoda Octavia from 2013 onwards, installation takes 5 to 10 minutes per side. There is plenty of room around the headlight and inside it to stow everything.
How much more light does the XTR LED kit give?
The XTR kits deliver 3600 lumens, which is 3.5x more than halogen.
Does the LED kit work with the CAN-bus system?
Hilox guaranteed Thomas that the kit is 100% compatible with current CAN-bus systems. That was a reason for him to choose Hilox.
Which other LEDs fit the Octavia?
The T10/W5W 3-SMD Power LED Hilox Evolution for parking light, interior lighting and number plate light, and the H8 LED Fog Light XTR 3200 Lumen for the fog light.
What is in the H7 XTR Black LED kit?
2 H7 XTR Black LED bulbs of 36.2mm, 2 XTR Black drivers and 2 XTR CAN-bus II modules of 12V.
Fire it up

Once a month,
a real letter.

New products, fitting tips and offers. No noise, never sold on.

Made withNeuramerce